PNEUMATIC PRESS BRAKES
The presses are designed for the parts production of sheet and strip products by the bending method.
Characteristics
Rated force, kN (tf)
—
100
The stroke of the slider (adjustable), mm
—
50
The value of the slider path to its lowest position, at which the press develops a nominal force, mm:
—
225
*The amount of adjustment of the distance between the table and the slider, mm, not less
—
25
Weight, kg
—
1780
Slider stroke, mm
—
50
PNEUMATIC PRESS BRAKES
The universal V-die supplied with the presses can bend a large number of different parts. The technological capabilities of the presses can be expanded through the use of special devices supplied for an additional fee to perform the operations of cutting sheet material, punching round and rectangular holes.
The presses can be used in locksmiths and workshops engaged in the production of small series parts by sheet stamping.
The presses are equipped with a mechanism for adjusting the inter-die space and the backgauge to install the bent workpiece on the bending line.
Press control: two-handed push-button and pedal.
The presses arc small, reliable and easy to operate.
A cheap energy source is used - air.
Lubrication of presses - manual.
The presses can be used in locksmiths and workshops engaged in the production of small series parts by sheet stamping.
The presses are equipped with a mechanism for adjusting the inter-die space and the backgauge to install the bent workpiece on the bending line.
Press control: two-handed push-button and pedal.
The presses arc small, reliable and easy to operate.
A cheap energy source is used - air.
Lubrication of presses - manual.
TECHNICAL SPECIFICATIONS
| Parameters | Models | |
|---|---|---|
| I1020А | И1020V | |
| Rated force, kN (at the pressure of 0.52 MPa) | 100 | 100 |
| Table dimensions, mm – from left to right – front to back |
1050 140 |
1450 140 |
| The distance between the racks of the press in the light, mm | 690 | 1350 |
| Slide stroke, not less, mm/s | 50 | 50 |
| The greatest distance between the table and the slider in its lower position with the upper adjustment position, mm | 225 | 225 |
| Adjustment distance between the table and slide, mm | 25 | 25 |
| Rear stop stroke, not less, mm | 210 | 210 |
| Compressed air working pressure, MPa | 0,5 | 0,5 |
| Maximum number of strokes per minute | 12 | 12 |
| Operating mode | Single move | |
| Press dimensions, mm | 1210х840 | 1710х920 |
| Height above floor level, mm | 1805 | 1760 |
| Weight, no more, kg | 800 | 1780 |