COMPOSITE PRESSES are designed to perform pressing and pressing operations, piercing, calibration, bending, and straightening of metal products.
The semi-automatic accelerated pressing press DP2436 is distinguished by the presence of a hydraulic accumulator, which provides high initial speeds of the working strokes of the slider or ejector (during transfer pressing), adjustable over a wide range, which allows for accelerated direct pressing or the production of thin reinforced products using the transfer method.
The press can operate in semi-automatic and adjustment modes for direct and transfer pressing.
The press allows you to work:
- with and without an ejector;
- with the engine turned off for the duration of holding under pressure and without turning off the engine;
- with and without pre-pressing;
- with and without a battery.
The design of the press ensures safe working conditions subject to the rules of transportation, storage, operation, maintenance and repair.
TECHNICAL SPECIFICATIONS
| Parameters | Models | |
|---|---|---|
| DP2436 | DP2436S | |
| Rated force, kN | 4000 | 4000 |
| Maximum slide stroke, mm | 800 | 400 |
| Lower ejector stroke, mm, not less | 400 | 400 |
| The greatest distance between the table and the slider, mm | 1400 | 820 |
| Table dimensions, mm, no more | 1250х1120 | 1250х1120 |
| Pusher force, kN, not less | 400 | 400 |
| Slider speed, mm/s – idle down, no less – working – idle up, no less |
100 5 50 |
100 4 30 |
Ejector speed, mm/s, not less | 40 | 30 | Electric motor power, kW, no more | 30 | 30 |
| Overall dimensions of the press, mm, – from left to right – front to back – height |
2700 1400 5000 |
2700 1400 5000 |
Weight (without hydraulic station), kg, no more | 15000 | 14000 |