Искать

SPECIAL OPEN SHEARS

Н1226Б The shears are intended for cutting the steel shapes (rounds, strips, squares, angle pieces). The shears may be used at enterprises of the construction industry, as well at machine engineering and repairing enterprises.

The bed of the shears is welded and mounted on wheels making it possible to easily reinstall the shears in the required service areas. The motor driven slider uses the V-belt transmission, the double-step cylindrical reduction gear and the eccentric shaft.

The rest with the rule is used for cutting the measured blanks. The tools for cutting the squares, rounds, strips, angle pieces are changeable. The shears are controlled with push buttons.

Basic specifications

The biggest allowed force at the shears, Kn 400
The biggest section of the cut material having the temporary rupture resistance50 kgf/mm2, mm
   round (diameter)
   square
   angle piece
   strip

32
27x27
70x70x6
6,3x80
Number of cutter travels per minute 15
Installed power, kW 2,4
Overall dimensions, mm
   from left to right
   from the front end to the rear one, with the rest
   height above the floor level

1300
820
1035
Mass of the shears, kg 1090

 

Написать письмо
ОАО "Кузлитмаш"
Адрес:

Республика Беларусь, 225710 г. Пинск, пр-т Жолтовского, 109

Телефоны:

+375 (165) 37-13-80, +375 (165) 37-14-16, +375 (165) 37-14-25 факс

Укажите Ваше имя и телефон, и наш менеджер свяжется с Вами в ближайшее время

Закрыть
Отправить