The presses are intended for making parts of the sheet materials by means of cutting, stamping, relatively shallow pulling and other cold-stamping operations. КП9534 and КД9536 presses may also be used for cutting off the fins (burrs) of the forgings in their cold or hot state.
The presses may be supplied as a complete set with the hydraulic and pneumatic cushion, and the necessity of their supply is determined by the customer.
КП2534 | КП9534 | КД2536 | КД9536 | |
---|---|---|---|---|
Rated force, kN | 2500 | 2500 | 4000 | 4000 |
Slider travel, mm | 200 | 320 | 250 | 400 |
Frequency of continuous travels of the slider, min-1, at least | 32 | 32 | 32 | 25 |
Frequency of single travels, min-1 | 24 | 24 | 24 | 19 |
Slider travel to its lower end position, where the press develops the rated force, mm | 10 | 6 | 12 | 8 |
Distance between the under-stamp slab and the slider in its lower position at the upper adjustment position, mm | 560 | 530 | 510 | 470 |
Distance adjustment value between the under-stamp slab and the slider, mm | 140 | 140 | 160 | 160 |
Size of the under-stamp slab, mm | 800×800 | 800×800 | 1000×1000 | 1000×1000 |
Size of the slider from the front end to the rear one, mm | 650 | 650 | 800 | 800 |
Width of windows in posts, mm | 500 | 500 | 600 | 600 |
Power of the main actuator motor, kwt | 26,5 | 26,5 | 37,0 | 37,0 |
Air consumption, n•m3/travel | 0,006 | 0,006 | 0,017 | 0,017 |
Dimensions of the press, mm - from left to right - from the front end to the rear one |
3000 2970 |
3000 2970 |
3470 3140 |
3470 3140 |
Height above the floor level, mm | 5180 | 5180 | 5940 | 5940 |
Mass of the press without a hydraulic cushion, kg | 23200 | 23300 | 32000 | 32600 |
Укажите Ваше имя и телефон, и наш менеджер свяжется с Вами в ближайшее время