Искать

FLANGE-CUTTING PRESSES

model НП4116
Intended for cutting the angle pieces in blanks along the contour having the angle at the top of 90° and more.
The control system is the relayed one. The operation modes "Adjustment", "Single travel". Control is carried out by means of push buttons in the "Adjustment" mode, by means of a pedal in the mode: "Single travel". The lubrication is manual.

COMBINED model НИП4216
Intended for cutting the angle pieces in blanks along the contour having the angle at the top of 90° and more, as well as for sheets bending.
The control system is the relayed one. The operation modes "Adjustment", "Single travel". Control is carried out by means of push buttons in the "Adjustment" mode, by means of a pedal in the mode: "Single travel". The lubrication is manual.  

Basic specifications

  НП4116 НИП4216
Biggest thickness of the processed metal sheet having temporary resistance
õв it is less than or equal 450 N/mm2, mm
3 3
Biggest sizes of the cut angle in plan (lengths of angle sides), mm 200x200 200x200
Working length of the bending tool, mm - 510
Biggest flanged width by the rest, mm - 90
Oil tank capacity, l 80 80
Working pressure, MPa 12 12
Power of the motor, kWt 3 3
Overall dimensions of the press without the control pedal, mm, not exceeding 710х640х1110 710х725х1305
Mass, kg, not exceeding 560 570

 

Написать письмо
ОАО "Кузлитмаш"
Адрес:

Республика Беларусь, 225710 г. Пинск, пр-т Жолтовского, 109

Телефоны:

+375 (165) 37-13-80, +375 (165) 37-14-16, +375 (165) 37-14-25 факс

Укажите Ваше имя и телефон, и наш менеджер свяжется с Вами в ближайшее время

Закрыть
Отправить