Искать

CRANK-TOGGLE PRESSES FOR COLD EXTRUSION OF METAL

Intended for fabrication by means of extrusion of various articles of the type of barrels and pins in the cold state.

Modes of operation:
- adjustment
- hand cranking
- setup
- single stroke
- fixed length stroke
Hand control panel.
Lubrication system: centralized liquid.

 

 

 

Basic specifications of the presses

  КБ0032 КБ0034 КП0036 КП0038
Rated force, Kn 1600 2500 4000 6300
Slider travel, mm 160 200 240 300
Frequency of slider travel, 1/min 50 40 32 25
Slider travel to its end lower position, wherein the press develops the rated force, mm 22 28 36 45
Distance between the under-stamp slab and the slider in its lower position at the upper position of adjustment, mm 435 490 590 700
Values of distance adjustment between the under-stamp slab, mm 16 16 16 20
Size of the under-stamp slab, mm
     from left to right
     from the front end to the rear one

630
630

820
820

1020
1180

1250
1250
Size of the slider, mm
     from the front end to the rear one

500

750

900

1000
Pusher travel, mm
     upper
     lower

16
90

16
110

25
140

25
300
Force of the pusher (extruder), kN
     upper
     lower

63
200

100
320

160
500

250
800
Power consumed by the control system, kN 29 33,5 56 63
Working pressure of compressed air, MPa 0,5 0,5 0,5 0,5
Air consumption, n·m3/travel 0,017 0,017 0,017 0,017
Overall dimensions, mm
     from left to right
     from the front end to the rear one

2220
1495

2750
1591

4100
2300

4150
2950
Height above the floor level, mm 3622 3925 4306 6490
Mass, kg 11460 25000 48200 85000

 

Написать письмо
ОАО "Кузлитмаш"
Адрес:

Республика Беларусь, 225710 г. Пинск, пр-т Жолтовского, 109

Телефоны:

+375 (165) 37-13-80, +375 (165) 37-14-16, +375 (165) 37-14-25 факс

Укажите Ваше имя и телефон, и наш менеджер свяжется с Вами в ближайшее время

Закрыть
Отправить