Искать

BENDING AND FORMING MACHINE WITH ROTARY BENDING BAR model ИВ2144

Standard delivery

 

 

 

This machine is designed for producing various pieces of sheet metal by bending.

Tooling supplied complete with the machine allows bending at an angle between 320 and 1800 radius 7 mm.

At an additional charge, the bending and forming machine can be delivered with various replaceable attachments for bending tubes, closed loops, U-shapes, boxes and edges.

The machine is operated from a hydraulic system which includes two master actuator cylinders, two cylinders for pressure bar, and a hydraulic power station. The bending and forming machine is provided with a rear mechanical limit stop having an indicator of position relative to bending line.

Wiring diagram provides operation of the machine in single strokes and in setup mode.

Lubrication–mixed, heavy-duty mechanisms are greased centrally.

 

Basic specifications

Maximum width of sheet to be bended 2500
Maximum thickness of sheet to be bended with ultimate strength not over 4,5
Maximum pressure bar travel 250
Maximum angle of bending bar turning, degree 180
Table control limits 100
Bending bar control limits 100
Minimum internal radius of bend 1,25 sheet thickness
Minimum beaded edge 8,0 sheet thickness
Maximum back stop travel 800
Operating pressure
- pressure
- bending

15
12,1
Power consumed by the control system, kWt 11,37
Overall dimensions, mm
- from left to right
- rearward
- height above the floor level

3790
3420
2420
Weight of machine with hydraulic unit, kg 6900

 

Написать письмо
ОАО "Кузлитмаш"
Адрес:

Республика Беларусь, 225710 г. Пинск, пр-т Жолтовского, 109

Телефоны:

+375 (165) 37-13-80, +375 (165) 37-14-16, +375 (165) 37-14-25 факс

Укажите Ваше имя и телефон, и наш менеджер свяжется с Вами в ближайшее время

Закрыть
Отправить